Thingiverse
FPV Simulator Box
by Halfrican
5
Downloads
3
Likes
0
Makes
This is a box for housing a 30x30 flight controller and connected receiver so it can be plugged into USB and used for PC simulators.
Requires F4 flight controller flashed with Betaflight 3.4 or higher. In CLI enter "set usb_hid_cdc=on" then "save" and you're all set for your FC and receiver to be used as a wireless radio simulator dongle.
If you want to return your FC for use in a quad, just set the above command to off.
I also use a spektrum receiver as it is 3.3v and can be powered easily over USB.
Requires F4 flight controller flashed with Betaflight 3.4 or higher. In CLI enter "set usb_hid_cdc=on" then "save" and you're all set for your FC and receiver to be used as a wireless radio simulator dongle.
If you want to return your FC for use in a quad, just set the above command to off.
I also use a spektrum receiver as it is 3.3v and can be powered easily over USB.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
