FPV Turtle Feet

When racing every second counts and being able to get back in the air quickly after a crash can mean the difference between taking the win and second place.These turtle feet are specifically designed for FPV racing drones with bottom mounted batteries in order to prevent the quad from leaning to one side after using crash flip / turtle mode and not being able to re-arm due to the props touching the ground.For 16mm motor bolt diameter with 3mm holes.You will need to use 2mm longer bolts than you usually do, and it's also a good idea to add a small washer under the bolts head to spread the load.You may ask why are they all 24mm - well that's just the size that I found works best for me, it's just long enough to tip the quad back to level without them being so long that it adds too much extra weight.Printer SettingsYou should print the main body of the turtle feet at whatever infill and walls suit your needs and the material you are using, but the bottom layers need to be 100%