Thingiverse
FPV Yoda
by pepeprawn
21
Downloads
13
Likes
0
Makes
Need this or any other part but you don't have a printer. No problem visit my site and I will print you one or any other files you need to be printed.
Visit: Http://pandemicfpv.com
Visit my Youtube channel for Giveaways and reviews.
https://www.youtube.com/c/TheQuadcopterReview
This Desk Buddy was printed PLA.
Tips are always welcome! As I designer it often takes several prints that go in the trash to refine the end product. Custom design requests also reviewed. If I can do it for you I will.
Material: TPU
Brand: Sain Smart
Temp: 125c
Bed Temp: 55c
speed: 30
Retractions: Off
Layer height: .08 to .1 for me you are safe in this range. You only sacrifice a small bit of quality.
bottom/top thickness: 0.8
Fill Density: From 80 to 100 for a rigid finish 50 to 80 for a softer mount. I used 80 and 90
Support type: Touching Buildplate only.
Visit: Http://pandemicfpv.com
Visit my Youtube channel for Giveaways and reviews.
https://www.youtube.com/c/TheQuadcopterReview
This Desk Buddy was printed PLA.
Tips are always welcome! As I designer it often takes several prints that go in the trash to refine the end product. Custom design requests also reviewed. If I can do it for you I will.
Material: TPU
Brand: Sain Smart
Temp: 125c
Bed Temp: 55c
speed: 30
Retractions: Off
Layer height: .08 to .1 for me you are safe in this range. You only sacrifice a small bit of quality.
bottom/top thickness: 0.8
Fill Density: From 80 to 100 for a rigid finish 50 to 80 for a softer mount. I used 80 and 90
Support type: Touching Buildplate only.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
