MakerWorld
Electronics
Zum Modell
Fractal Terra Replica
1.4k
Downloads
523
Likes
40
Makes
For this build, I used a matte filament to minimize surface gloss and achieve a more uniform, premium looking finish. Regarding the wood like front panel, initial test prints were done using a wood filled filament. However, after evaluation, the final version was produced using PLA Silk Bronze, which provided a cleaner surface finish and a more visually appealing result. In terms of hardware compatibility, the case design supports: - CPU air cooler with a maximum height of 67 mm- GPU with a maximum length of 320 mm The structure was assembled using M3 screws and M3 heat set threaded inserts, ensuring reliable mechanical strength and ease of maintenance ( links provided down below ). For optimal printing results, I recommend using the following slicer settings: Wall order: outer to innerOuter wall speed: 60 mm/sInner wall speed: 80 mm/sBridge speed: 25 mm/sWall count: 4Avoid crossing walls: enabledThick Bridges : enabledSupport for the Back Panel Only Do not forget to properly calibrate
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!