MakerWorld
Decor
Voir le modèle
Fractal Tree LED light
13
Téléchargements
3
Likes
6
Makes
I have posted two different sizes for this fractal tree light- a small light ("FractalTree.STL, appx 3" wide and 4.5" tall), and a larger version (FractalTree2.STL, appx, 4.5" wide and 8.5" tall).I printed my parts in white PLA using the spiralize setting.These tree lights were designed with a hole in the base to fit an LED light I pirated from a Christmas decoration I purchased at my local Dollar Tree (the LED shown on the table in the last photo). Post-Printing AssemblyStep 1: Print tree.Step 2: Remove LED light from dollar store decoration.Step 3: Apply some felt or foam feet to the bottom of the 3D printed part (this will allow any heat from the electronics to dissipate,and also left some head space under the part for the switch on the lights I purchased).Step 4: Double-check that LED light works, then turn the light sideways and gently poke the light through the slit in the bottom of the 3D printed part.Step 5: Use a toothpick to apply plastic epoxy around the
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !