Thingiverse
Fractal vase 1
di sgust
8
Download
8
Likes
0
Makes
This is a fractal vase. As usual with objects of this type it is a solid object and needs to be hollowed out by the slicing software. To do that set the infill to 0% and print without top layer. You can either print this in vase mode or use 2 or 3 perimeters. Turn off "ensure vertical thickness".
The OBJ file you can download here is a lower resolution version, only 500x500x1000 voxels. I also have created a 2000x2000x4000 voxel version, but the OBJ file is quite big (10GB Original, 2GB Zipped), bigger than what Thingiverse currently supports, so you have to download it as Zip file from my [Onedrive](https://1drv.ms/u/s!AvTYCP1wyam3iGJeKMb8iclpi1_G?e=IDvVDG) account.
The vase is scaled to about 20cm height and 10cm diameter.
You also need lots of memory to slice this successfully. If you don't have enoug memory you can use the PrusaSlicer in command line mode without gui. First start the GUI and change the settings as needed. Save these settings as parameter file. Then run "pr
The OBJ file you can download here is a lower resolution version, only 500x500x1000 voxels. I also have created a 2000x2000x4000 voxel version, but the OBJ file is quite big (10GB Original, 2GB Zipped), bigger than what Thingiverse currently supports, so you have to download it as Zip file from my [Onedrive](https://1drv.ms/u/s!AvTYCP1wyam3iGJeKMb8iclpi1_G?e=IDvVDG) account.
The vase is scaled to about 20cm height and 10cm diameter.
You also need lots of memory to slice this successfully. If you don't have enoug memory you can use the PrusaSlicer in command line mode without gui. First start the GUI and change the settings as needed. Save these settings as parameter file. Then run "pr
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!