MakerWorld
Hueforge & Lithophane
Voir le modèle
Frank Ocean - Channel Orange
49
Téléchargements
39
Likes
20
Makes
Frank Ocean - Channel OrangePrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x199.69mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm Filaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #ff6a13 PLA BambuLab Basic Orange Transmission Distance: 5 #0078bf PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments (IGNORE IF USING AMS)Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Orange At layer #22 (1.84mm) swap to Marine Blue At layer #23 (1.92mm) swap to Jade White for the rest.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
