Fred Flintstone 1

If you print this please post a photo of your print. ThanksI didn't have orange so I used a translucent red. IMPORTANT >>> Ignore the floating region warning!Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 147.25x160mm in sizeYou may print at higher layer heights below the Min Depth of 0.56mmThe Max Depth is 2.04mm and the Actual Depth is 2.04mm Filaments Used: PETG Creality Black Transmission Distance: PETG Tpoimns Gray Transmission Distance: PETG