Freddy Hueforge

Project: freddy k.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.64mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.52mmFilaments Used: #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #5d2a2c PLA Paramount 3D Black Cherry Transmission Distance: 2 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #f0be02 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5 #e6dede PLA Overture Matte White Transmission Distance: 3.7This print uses 6 unique filamentsSwap Instructions: Start with Charcoal At layer #10 (0.88mm) swap to Black Cherry At layer #12 (1.04mm) swap to Blue Gray At layer #13 (1.12mm) swap to Red At layer #14 (1.2mm) swap to Savannah Yellow At layer #16 (1.36mm) swap to White for the rest.