FreeDeck v1.2 Case

A simple case for keeping the electronics with certain angle, for the FreeDeck project rev 1.2.

# About the project:
This project was made by Adam Welch
You can find more information here - https://github.com/FreeYourStream.
Video related: https://www.youtube.com/watch?v=-3Zw8hbpVq4


# Bill of Materials:
* 4x Head flat screws M3x12mm
* 4x Knurled insert nut M3x3mm (OD4mm)
* A piece of rubber sheet with some texture to bring some grip to the device. (Optionally for being glued in the bottom of the case)

You can find this materials here:
* https://www.aliexpress.com/item/33049019185.html
* https://www.aliexpress.com/item/1005001605269666.html
* https://www.aliexpress.com/item/1005001598404873.html

# Note:
This case was designed with a inclination of 25,8º.

Use a soldering iron to easy the action of embbeding the knurled insert nuts

Pay attention and take care with the micro USB connector, because is easy to break this one from the pcb. To solve this I fixed