Thingiverse
Freeline Skate Decks
door Griffin175
7
Downloads
8
Likes
0
Makes
I have not printed the JMK version myself; I don't have the trucks. Please let me know if the holes need adjustment!
The side with the raised edge is the top. This is to recess the grip tape a bit to prevent it from rubbing together and wearing out.
I recommend using PETG, high infil density (60-90%) and a thick nozzle (0.8-1.2mm) for strength. Other high strength filaments might be better, like nylon. You could try PLA but don't be surprised if they crack or warp on a hot day!
Hole in the corner to clip them together with a carabiner.
Fits Zodae / asFrost skate trucks.
JMK Ride grip tape fits
The side with the raised edge is the top. This is to recess the grip tape a bit to prevent it from rubbing together and wearing out.
I recommend using PETG, high infil density (60-90%) and a thick nozzle (0.8-1.2mm) for strength. Other high strength filaments might be better, like nylon. You could try PLA but don't be surprised if they crack or warp on a hot day!
Hole in the corner to clip them together with a carabiner.
Fits Zodae / asFrost skate trucks.
JMK Ride grip tape fits
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!