French Cleat System for Picture Frames

I made some simple French cleats for the Infill Pattern Picture Frames by RomeEight1Can be used for other frames as well. In the .3mf file, there are two plates. One for horizontal mounting and one for vertical mounting. You can technically use the vertical one for both orientations. The only difference is the size of the wall side mount, which gives the vertical mount a little more room for adjustment. (In the photos I cut it in half instead of printing the smaller size)Instructions for Mounting with a French CleatMaterials Needed:Super glueCommand stripsSteps:Apply super glue to the frame side cleat and attach it to the backplate of the frame. Ensure it is perfectly straight.While centering is not crucial, aim for a straight alignment, as the French cleat allows for some horizontal adjustment.Attach a command strip to the wall side cleat.Use a level to mount the wall side cleat, following the command strip instructions (typically applying pressure for 20-30 seconds).Once the wall cle