Thingiverse

Frenchie

by Sculptor

279 Downloads

344 Likes

15 Makes

Meet Frenchie!
Sculpted in Zbrush, about 20-25 h of sculpting (I think).
I worked hard to achieve that french look :)
This sculpture is printable without support as usual.
For the printed model in the picture I used ColorFabb's WoodFill fine PLA. It has 30% wood in it which makes it perfect to sand down imperfections. I then covered it with gray primer.
If you want to see more of my characters:
http://olasundberg.com
Cheers
/Sculptor

french frenchie ola portrait woman zbrush french frenchie ola portrait woman zbrush

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

PLA, Wood PLA

Est. print time

25 h

Post-processing

Sanding

Software

Cura, PrusaSlicer, or similar

Same designer, more platforms

Sculptor also publishes on

3 additional models across 1 more platforms

Cults3D

3 models

♥ 364 ↓ 5,921

Frequently Asked Questions

Does Frenchie need supports when printing?

No supports needed for Frenchie — it's designed to print clean off the bed.

How long does it take to print Frenchie?

According to the design notes, Frenchie takes approximately 25 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Frenchie available in?

Frenchie is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Frenchie free to download?

Yes, Frenchie is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Frenchie

Add to Collection