Thingiverse

Fridge Logic Gates

von omarjij

1 Downloads

1 Likes

0 Makes

::This is a must-have kit for every engineer out there::

::How it Works::

Apply glue into hole and insert cylindrical magnets into hole and push firmly. The Magnets should be around 6~6.4 mm in diameter
and 1~2 mm in height.

You can buy magnets and glue them to the logic gates:
https://www.aliexpress.com/item/32977876982.html

Or you can cut your own magnets out of magnet sheets

and gate fridge magnet gates logic gate nand gate nor gate not gate or gate souvenir xnor gate xor gate and gate fridge magnet gates logic gate nand gate nor gate not gate or gate souvenir xnor gate xor gate

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Warum?

aufwändige Nachbearbeitung

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 2/3

Drucker

FDM / FFF

Dateiformat

STL

Material

Nachbearbeitung

Kleben, Hardware

Software

Cura, PrusaSlicer o. Ä.

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

Fridge Logic Gates

Zur Sammlung hinzufügen