Slicer Discord
Friendly Ghost Night Light – 3D printable model from MakerWorld MakerWorld
Decor

Friendly Ghost Night Light

by Andrew96 · Decor
1 Downloads
4 Likes
0 Makes
Go to Model
here's my friendly little ghost night light that I design to house a c7 socket. It's about 8 ½ inches tall, 4 inches wide, and 4 inches deep. You can safely block all support inside the body, you only need supports on the cup and the arm. I do recommend setting wall thickness to 1.2mm for the best durability/visibility of light ratio. I run 0% infill on the body and I normally run 10% infill on the base and legs. I recommend setting wall count to 5 for any pieces with pegs like the adapter plate or the legs with socks. For the best results a recommend “user specified z-seam” and just running it down the back. This is designed to house a c7 light socket which comes in little Christmas villages, you can find these at craft shops like hobby lobby or you can order it from Amazon. If you are printing out of PLA I recommend maxing out at 40w because anything larger seems to put off a lot of heat. It can house a c7 or b10 bulb (if it has an e12 socket). 5000k color gives a nice white
Category
Decor
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Low confidence
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PLA
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection