Frieren Landscape

Made with Hueforge
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x122.71mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.72mm and the Actual Thickness is 2.72mm
PLA+ Elegoo Black Transmission Distance: 0.8
PLA+ Elegoo Purple Transmission Distance: 2
PLA+ esun Gray Transmission Distance: 1.4
PLA+ Elegoo White Transmission Distance: 5.4
PLA+ esun Blue Transmission Distance: 1.5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Purple
At layer #13 (1.12mm) swap to Gray
At layer #14 (1.2mm) swap to White
At layer #18 (1.52mm) swap to Purple
At layer #19 (1.6mm) swap to Blue
At layer #20 (1.68mm) swap to Purple
At layer #24 (2mm) swap to Blue
At layer #25 (2.08mm) swap to White for the rest.