Frisbee - Easy to print :)

Hi Y'all,
This is a design I made to make our beloved frisbees more printable. There are other cool designs online but I always had problems to print them with TPU.
This version is easy to print and has the same weight (around 160g) as a freestyle frisbee.


You can buy me a coffee if you like the design :) -> #paypal.me/rubbl

I also uploaded the Cura settings so you can start your print asap (I recommend the z offset plugin! See below)

Here are some twerks and settings I used to get the most out of it:

- I used a 1.00mm nozzle. (decreases printtime to ~7h)

- layer height: 0.32mm

- set z offset to 0.2mm
-> requires plugin:
https://marketplace.ultimaker.com/app/cura/plugins/fieldofview/ZOffsetPlugin

- bed temperature: 0°C

- nozzle temperature: 230°C

- disable fan

- initial layer flow: 130%

- top/bottom pattern: concentric

#for freestyle frisbees:

infill: 5% (for ~155g)

scale z-axis to 20mm

#for ultimate frisbees:

infill: 20% (for ~