Frisbee magnetic light

### Turn your regular ultimate frisbee into glowing one


This is my weekend DIY project and first design upload on Thingverse.
It's a box with 4 LEDS powered by battery which can be easily attached to the disk with magnets. No need for glue. Lid for battery replacement. It is perfect if your want to throw disk in darkness.

It takes 1 hour and basic soldering skills to assemble it.
You would need:
- 2 magnets 3x15mm
- 4 LEDs 5mm
- 4 resistors
- 1 CR2032 battery
- 1 [battery socket](https://www.amazon.de/-/en/Portable-General-Battery-Adapter-Container/dp/B07MJG6XZR/ref=sr_1_4?dchild=1&keywords=cr2032+halter&qid=1614460043&sr=8-4)
- 1 [switch](https://www.amazon.de/-/en/Horizontal-Switch-Assembly-Soldering-Format/dp/B07LBPDB6S/ref=psdc_2076402031_t3_B07Z4RW9X6)

I attached assembling scheme image and Sketchup project file (you need to scale model for 0.5 before printing).

LEDs are connected parellel. I soldered short leg (ground) of each LED to short led of LED to