Slicer Discord
Fritz!Box 7590 Cooler – 3D-Druckmodell von Thingiverse Thingiverse

Fritz!Box 7590 Cooler

von Qetesh
38 Downloads
14 Likes
1 Makes
Zum Modell
Cooling Stand for the AVM Fritz!Box 7590 which tends to run quite hot especially in summer.
It is designed to take the 5V Sunon HA60150V3-E02U fan which has a quite unique design that makes it perfect for this case and is almost inaudibly silent while running on full speed.

After putting the box on the stand and connecting the fan to the USB port, the CPU temperature fell from about 80°C to 50°C within 10 minutes.

Print the two frame parts and four times the leg, connect everything with M3 screws, place the fan and put the Fritz Box on top. No need to screw the fan down - it sits perfectly - but the option is there.
Quelle
Thingiverse
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen