Thingiverse
FrSky RXSR Case V2
par mattbeau
7
Téléchargements
9
Likes
0
Makes
*Update 9/24*
I discovered that when you install the antennas in the antenna tubes, your probably going to break the glue free. I provided an access hole to re-fix the antennas in once you have everything installed.
*Update 9/23*
Someone suggested having room for 1mm High density foam tape. I also decided to support the picoblade connector and added slots for zip tie mounting if desired.
I made this to mount the receiver in a helicopter, the photo is of the receiver mounted in an Oxy 3 which is a 300 size helicopter. I wanted better control of the antennas without taking up to much room. There is a cavity on the bottom of the case to make room for the antenna connections so it sits flush.
Let me know if you find any problems or if it works for you.
I discovered that when you install the antennas in the antenna tubes, your probably going to break the glue free. I provided an access hole to re-fix the antennas in once you have everything installed.
*Update 9/23*
Someone suggested having room for 1mm High density foam tape. I also decided to support the picoblade connector and added slots for zip tie mounting if desired.
I made this to mount the receiver in a helicopter, the photo is of the receiver mounted in an Oxy 3 which is a 300 size helicopter. I wanted better control of the antennas without taking up to much room. There is a cavity on the bottom of the case to make room for the antenna connections so it sits flush.
Let me know if you find any problems or if it works for you.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !