Thingiverse

fruit box

by kneipenruepel

68 Downloads

62 Likes

0 Makes

useful box for small fruit (blueberries, raspberries, strawberries, pineapple pieces, etc.). Can be used as a freezer box for the refrigerator or as a lunchbox.
Here are a few more tips:
-the two lids are not locked when closed, i.e. if the box accidentally tips over, the contents fall out.
If you use the box as lunchbox, I recommend the variant "box_with_magnetholder.stl", "cover_with_magnetholder.stl", "mangnetholder_cover.stl".
There are inlets for neodymium magnets included. Into the indentations fit 4 magnets of size 8x2mm (or smaller).
Magnets are available for little money, for example at https://www.amazon.co.uk/Magnet-Expert%C2%AE-8mm-thick-Neodymium/dp/B007JTL25M/ref=sr_1_2?keywords=magnet+8x2&qid=1582970079&sr=8-2
(Works very well, if I turn the full box upside down, the box stays closed).
- Contains a sieve "sieve.stl". This is optional, but very practical if the fruit is still very moist.
- I still put a napkin or some baking paper in the box so that the fru

blueberries blueberry box dry fruit Dry Fruits Dry Fruit box freeze freezer freezing fridge fruit fruits lunch lunchbox Lunch Box Obst obstacle pineapple raspberry refrigerator blueberries blueberry box dry fruit Dry Fruits Dry Fruit box freeze freezer freezing fridge fruit fruits lunch lunchbox Lunch Box Obst obstacle pineapple raspberry refrigerator

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format