Fruit Dryer/Dehydrator Riser (Outer Diameter 28cm)

Suitable for a fruit dryer with an outer diameter of 28cm (actual diameter is approximately 27.6cm), the riser height is 4cm. Simply cut a piece of filament and insert it into the round holes of each part to connect them. The initial design only had one hole, but it was found to rotate, so it has been modified to include two holes on the top and bottom, both of which are connected by inserting filament. If the filament connection is not stable, use the most basic method of tape to reinforce it. The fruit dryer is the most common model on PinDuoDuo (Xiao Pang Ge), which should be the same as many generic products. The riser is printed without supports, so you need to add a brim and ensure that the bed is leveled, and the machine has minimal vibration.