Frustration Rummy

After trying a few other versions of this game I decided to create my own with some improvements. Pegs go inside board and secured by tight door and magnets (Optionally 5X2MM FOR DOOR AND 5X3MM FOR BOARD). When you first go to put door on it will be VERY tight, so DO NOT TRY TO PUSH IN ALL THE WAY… Slowly work it back and forth until secure then should slide nice but still be snug. Optionally you can also add one 5 mm x 3mm magnet to the main board and one 5mm x 2mm magnet to the door. You can get away with a 5mm x 2mm on the board as well, just do not press too far in and use a dab of glue to ensure they stay, but they will be very tight, so don't really need glue, but you can. Board will hold 8 pegs so you can print two extra incase you loose any. I do recommend you print one peg first to see how it fits the holes once the board is printed, then scale up or down by 2% to get desired fit.Instructions are on the back so just grab two deck of cards and your ready to go! Very popular