FT-5 Dual Extrusion Setup

FolgerTech FT-5 Dual Extrusion Modifications using two Delta Printr Mini Hotends and two E3D Titans.

Step files have been included for anyone to edit for whichever hotends they have.

It utilizes an [Inductance Probe](https://www.amazon.com/gp/product/B00979RA1M/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1) and a [Radial Fan](https://www.amazon.com/gp/product/B00MJU6JR2/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1).

The firmware (**FT-5__-_Dual_Extrusion.zip**) included is already modified for the dual extruders, the hotends, and the endstops being setup for y-max and x-max and as such need to be switched on the control board to y-max and x-max with the z-probe plugged into z-min. The auto-homing is calibrated in the firmware for a PEI sheet on top of the stock aluminum sheet.

Currently the hotend offset is built into the firmware and not the slicer. This must be changed if different hotends are used.

I'm still working on a proper Cura File and will **upload** it when it is