FT Bushwacker Main Landing Gear

This is the main landing gear for the Flitetest FT Bushwacker. I used a nail that I cut off and threaded for each axel, but you can also just run a heavy piece of coat hanger, or wire rod all the way across to both sides. I put on 80mm foam wheels I got from Banggood.

In order to install this landing gear, you will also need to print and install this landing gear brace that was designed by Jeremyjo. You can see it installed in one of the included pictures.
https://www.thingiverse.com/thing:3646797
I was able to install this brace with hot glue during construction, but you can maybe install it through the battery hole. Once this brace is installed the gear will screw on with 2 short M4 screws and nuts. Then a skewer is pushed through the hole in the side of the gear and plane for final attachment.
Once installed, you should be able to cut the slots for a battery strap.