FT MiG 3 replaceable wheel pants

Directly interchangeable with another of my projects, https://www.thingiverse.com/thing:3248338 simply by screwing it into the mounting plate that goes inside the wing. See that file's description if you are unsure how the plate should be assembled or installed.

This particular file is presently untested, as our snow is too deep for wheels currently.

Assembly requires roughly an inch and a half of landing gear wire (or perhaps a toothpick, if you're feeling brave), three M3 machine screws, and a 2.75" wheel such as Flite Test sells. That brand will definitely fit, since that is what the wheel fairings were built around, but others should fit as well. Different lengths of bushing have been included to keep the wheel stable as you see fit; or you may just use washers instead.

It is highly recommended you use thin wall printing for this. Print the bushings as provided in the files, with the short bushings having their narrow side down, and the long bushings with their solid sid