Thingiverse

FT4232H-56Q Mini Module Holder

by david534d

1 Downloads

0 Likes

0 Makes

Holder for an FT4232H-56Q Mini Module. Helpful when experimenting with this USB mini module.

FT4232H-56Q Mini Module Datasheet (Version 1.4) : https://ftdichip.com/wp-content/uploads/2020/07/DS_FT4232H-56Q_Mini_Module.pdf

I print with no supports and 100% infill to give it some weight.

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

32 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does FT4232H-56Q Mini Module Holder need supports when printing?

No supports needed for FT4232H-56Q Mini Module Holder — it's designed to print clean off the bed.

How long does it take to print FT4232H-56Q Mini Module Holder?

According to the design notes, FT4232H-56Q Mini Module Holder takes approximately 32 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is FT4232H-56Q Mini Module Holder available in?

FT4232H-56Q Mini Module Holder is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is FT4232H-56Q Mini Module Holder free to download?

Yes, FT4232H-56Q Mini Module Holder is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

FT4232H-56Q Mini Module Holder

Add to Collection