Thingiverse
FT5 Full Graphic Controller Angeled Mount
door FireBookDuo
140
Downloads
73
Likes
4
Makes
A angled bracket and faceplate to mount a full graphic smart controller on the FolgerTech FT-5.
Tilted at 30 degrees, it helps with usability and screen readability if you have your FT5 sitting on a low table, but also works any many other situations.
You will need two M4 screws or bolts to connect the faceplate to the bracket. The bolts will tap directly into the bracket without nuts. You can add an optional M4 bolt and t-nut to attach the upper faceplate ear to the frame for stability. You can reuse the M5 bolts and t-nuts from the factory LCD mount.
The faceplate has cutouts to clear the piezo speaker, contrast adjustment pot and LCD pins so everything sits flush.
The emergency stop button has a guard to prevent accidental activation.
All STL files have been repaired, oriented and are ready to print.
This could also work on other 2020 extrusion framed printers.
Tilted at 30 degrees, it helps with usability and screen readability if you have your FT5 sitting on a low table, but also works any many other situations.
You will need two M4 screws or bolts to connect the faceplate to the bracket. The bolts will tap directly into the bracket without nuts. You can add an optional M4 bolt and t-nut to attach the upper faceplate ear to the frame for stability. You can reuse the M5 bolts and t-nuts from the factory LCD mount.
The faceplate has cutouts to clear the piezo speaker, contrast adjustment pot and LCD pins so everything sits flush.
The emergency stop button has a guard to prevent accidental activation.
All STL files have been repaired, oriented and are ready to print.
This could also work on other 2020 extrusion framed printers.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
