Robotics
Ver Modelo
FTC Pixel Arm
3
Descargas
11
Likes
0
Makes
This arm is designed to pick up and place the Pixels in this year's FTC robotics competition. The mount was made to attach the arm to the REV-45-1877 Drivetrain Kit, but should be easy enough to design a mount specifically for your team's robot. All non-printed parts are from VEX.
REV Drivetrain: https://www.revrobotics.com/rev-45-1877/
2x 393 Motors: https://www.vexrobotics.com/393-motors.html
4x Plastic Shaft Inserts: https://www.vexrobotics.com/hs-hardware.html
2x Metal Shaft Inserts:https://www.vexrobotics.com/hs-hardware.html
7x #8-32 Keps Nut: https://www.vexrobotics.com/nuts-8-32.html
4x #8-32 x 3/4" Screw: https://www.vexrobotics.com/all-screws.html
3x #8-32 x 1.000" Screw: https://www.vexrobotics.com/all-screws.html
2x 2" High Strength Shaft: https://www.vexrobotics.com/hs-hardware.html
You'll also need to cut one of the shafts to 1.5", and you'll need screws to attach the arm to the drivetrain.
REV Drivetrain: https://www.revrobotics.com/rev-45-1877/
2x 393 Motors: https://www.vexrobotics.com/393-motors.html
4x Plastic Shaft Inserts: https://www.vexrobotics.com/hs-hardware.html
2x Metal Shaft Inserts:https://www.vexrobotics.com/hs-hardware.html
7x #8-32 Keps Nut: https://www.vexrobotics.com/nuts-8-32.html
4x #8-32 x 3/4" Screw: https://www.vexrobotics.com/all-screws.html
3x #8-32 x 1.000" Screw: https://www.vexrobotics.com/all-screws.html
2x 2" High Strength Shaft: https://www.vexrobotics.com/hs-hardware.html
You'll also need to cut one of the shafts to 1.5", and you'll need screws to attach the arm to the drivetrain.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!