FTS Long Range Tripod Optic - Adjustable

This is an adapter to let you build a tripod table. I use it to mount 2 optics on a single tripod. I use my spotting scope on one side, and this adjustable adapter on the opposite side to direct a laser rangefinder for precise ranging.

In addition to the files here, you will also need:
O-Rings: -006 size 2-4 of them
Heat Set Inserts: 94180A331 x5
M3 x 40mm Hex Head Cap Screw: x1
M3 Coupling nut: x1
M6 Hex Head Cap Screw (About 20mm in length is fine): x 1
M6 Jam Nut: X1
Red (permanent) Loctite
Press Fit Drill Bushing with Head: 1/8" ID, 1/4" OD. 4 holes are to be drilled, you can get as few as 1 and just switch the bushing into the different holes.
Arca Swill Clamp: https://www.amazon.com/gp/product/B00KYEO70Q/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

I purchase most of my parts from McMaster-Carr (hence their part number on the inserts), but you can buy them wherever. I include the part number for the inserts because I've sized the holes to work with this insert