MakerWorld
Hueforge & Lithophane
Voir le modèle
fubuki
1
Téléchargements
4
Likes
0
Makes
Project: fubuki 8!.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x330.45mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Red Transmission Distance: 4 PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Tough Pine Green Transmission Distance: 1.5 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Red At layer #8 (0.72mm) swap to Black At layer #10 (0.88mm) swap to Pine Green At layer #15 (1.28mm) swap to White for the rest.Boost Meboost plz also send any request =)
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
