Thingiverse

Full size Traffic Cone (Pilon)

by Glompie

7 Downloads

9 Likes

0 Makes

Full size traffic cone 355mm or about 14 inch.
€3,15 material used so a good substitute for the ones you can buy.

Best material would be red and white PET or PETG.

square 180mm
height total 355mm / 2= lower than 180mm for one piece

Source

Thingiverse

What you need to print this: Beginner Low confidence

Why?

print-in-place design · very large print

Print-in-place May need scaling or splitting

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 3/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PETG

Min. bed size

300 mm (Extra large)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Full size Traffic Cone (Pilon)?

Any FDM printer should handle Full size Traffic Cone (Pilon) just fine. It's been printed on machines like Bambu Lab X1C, Prusa MK4, Creality K1 Max, Anycubic Kobra Max. A minimum build volume of 300 mm is recommended.

Does Full size Traffic Cone (Pilon) need supports when printing?

Nope — Full size Traffic Cone (Pilon) is print-in-place, so it comes off the bed ready to use. No supports, no assembly.

What file format is Full size Traffic Cone (Pilon) available in?

Full size Traffic Cone (Pilon) is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Full size Traffic Cone (Pilon) free to download?

Yes, Full size Traffic Cone (Pilon) is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Full size Traffic Cone (Pilon)

Add to Collection