Thingiverse
Fully 3D Printed Air Engine
door Martimv
88
Downloads
72
Likes
0
Makes
I decided to edit Tom Stanton's air engine and make it fully 3D Printable
(remove the need for screws, bearing, etc) here is the result
I went to 70PSI, but i cannot guarantee that it will work with you!
you can download the fusion 360 file is air-engine.f3d and edit if you want
https://www.youtube.com/watch?v=3OBtR_EZo9E
https://www.youtube.com/watch?v=YLPY8CY5Fm4&t=657s
for now just follow tom stanton's tutorial, the only major thing that changes is that the connecting rod is pressure fitted , and you use superglue to connect the cylinderhead
bearing is on the file 608, choose the one best fitted for your printer, I used 608_tight
Print settings:
Nozzle diameter - 0.2mm
Print width - 0.25mm
Layer height - 0.1mm
Top/Bottom layers - 6
Outer walls - 6
Infill - 50%
Infill type - Rectilinear
Material - PLA
Print speed - 50mm/s
Nozzle Temperature - 220c
Bed temperature - 40c
*These settings are required for this print. The other settings can be changed d
(remove the need for screws, bearing, etc) here is the result
I went to 70PSI, but i cannot guarantee that it will work with you!
you can download the fusion 360 file is air-engine.f3d and edit if you want
https://www.youtube.com/watch?v=3OBtR_EZo9E
https://www.youtube.com/watch?v=YLPY8CY5Fm4&t=657s
for now just follow tom stanton's tutorial, the only major thing that changes is that the connecting rod is pressure fitted , and you use superglue to connect the cylinderhead
bearing is on the file 608, choose the one best fitted for your printer, I used 608_tight
Print settings:
Nozzle diameter - 0.2mm
Print width - 0.25mm
Layer height - 0.1mm
Top/Bottom layers - 6
Outer walls - 6
Infill - 50%
Infill type - Rectilinear
Material - PLA
Print speed - 50mm/s
Nozzle Temperature - 220c
Bed temperature - 40c
*These settings are required for this print. The other settings can be changed d
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!