Fully Printable Locking Pliers

Locking pliers made for a engineering class.Use a strand of filament as a axle for the worm gear, there is a hole that passes through the body of the gripper.Print at least 1 RackRivet, and at least 3 ScrewReplacement. M6 screws can be used for ScrewReplacement, and they can be used for RackRivet if the screw is cut to 19mm and the head is removed.Recommended settings for RackRivet and ScrewReplacement:4+ walls50%+ infillPrint on long sideRecommended settings for everything else:4+ walls25%+ inf