Fume extractor (vase mode)

Fume extractor components for use with 125mm flexible tube and 140mm PC fan. Printed using vase mode with 0.8mm nozzle. The vase mode makes it print surprisingly fast and with the large nozzle, it's still sturdy enough.Required components:2 or more pieces of 125 mm diameter flexible tubea standard 140mm PC fan (I used Noctua NF-A14 industrialPPC-3000 PWM, but a less powerful fan will work too)four M4x40 screws with hex nutsPrinting:Option 1 - use the uploaded gcode files (with 0.8mm nozzle)Option 2 - use the following slicer settings:Nozzle size - 0.8 mm (I didn't test with with any smaller nozzles)Layer height - I used 0.4 or 0.55 mmVase modeSolid layers (bottom) - depends on the model and layer height - check the preview and adjust so there aren't missing layers (too few) and the inside isn't blocked (too many)Assembly:Screw both fan adapters to fan with the M4 screws (take a note the fan airflow direction)Put the flexible tubes on fan adapters, fume hood, and window