Funnel

I need this funnel to pour powders into a bottle - like cement, sand, plaster, etc. But I use it to pour resin, epoxy, paint, and all kinds of crafting materials. The good thing is when you have the option to print the tool when you need it. .To be honest, I printed the first one only for one purpose: to load Kool-aid powder in a PET bottle 😁.You can increase or decrease the size of the funnel as you see fit - from 50% to 200% - depending on your needs.You may have difficulty 3d printing this funnel in vase-mode, because it has a brim, which some slicer programs see it as an top page (don't want to print in vase mode) - but it's worth a try! I usually 3d print in vase mode (it is 4 times faster) but with a wide nozzle of 0.8 mm and the 3d print is completed in 15-20 minutes..The fail-proof way to 3d print this funnel is to print in normal mode. the thickness of the page is 1 mm (if not scaled), and I usually have the printer settings like this:Walls: 3Top layers: 3Bottom layers: 3Infill: 20%Support: NOBuild plate adhesion: Skirt 3Model dimensions:Width: ⌀ 90 mmHeight: 80 mmFunnel hole: ⌀ 14 mm (a little wider than usual 👍)Enjoy!