Thingiverse

Fusion Planter, "Vase Mode" print

by SLIMPRINT

112 Downloads

98 Likes

0 Makes

A round planter with a combination of a smooth surface and a striped texture, called Fusion Planter.

Perfect for cacti and succulents.

Designed to be printed in vase mode.

Size: 11 x 10 cm (100% scale)
Print time: 2 - 3 hours

Happy printing

Non-commercial use only

---

Nozzle size: 0.4mm (preferably 0.6 or 0.8mm)
Layer height: 0.2mm
Layer width / extrusion width: > 0.6mm, 0.8mm
Print speed: 35 - 45 mm/s
Vase mode (spiralize outer contours)

cactus cactus planter garden gardening indoor garden plant planter planters planters pot Plantpot Slimprint spiral succulent succulents succulent pot vase mode cactus cactus planter garden gardening indoor garden plant planter planters planters pot Plantpot Slimprint spiral succulent succulents succulent pot vase mode

Source

Thingiverse

What you need to print this: Intermediate

Why?

no supports · large print · 0.20mm layers

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

PLA

Min. bed size

200 mm (Large)

Layer height

0.2 mm

Est. print time

3 h

Post-processing

Sanding

Software

Cura, PrusaSlicer, or similar

Same designer, more platforms

SLIMPRINT also publishes on

201 additional models across 3 more platforms

Printables

133 models

♥ 14,551 ↓ 79,303 ⚒ 1,072

MakerWorld

40 models

♥ 5,061 ↓ 13,732 ⚒ 8,354

Cults3D

28 models

♥ 2,069 ↓ 31,655

Frequently Asked Questions

Which 3D printer is suitable for Fusion Planter, "Vase Mode" print?

Any FDM printer should handle Fusion Planter, "Vase Mode" print just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

Does Fusion Planter, "Vase Mode" print need supports when printing?

No supports needed for Fusion Planter, "Vase Mode" print — it's designed to print clean off the bed.

How long does it take to print Fusion Planter, "Vase Mode" print?

According to the design notes, Fusion Planter, "Vase Mode" print takes approximately 3 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

Is Fusion Planter, "Vase Mode" print beginner-friendly?

Fusion Planter, "Vase Mode" print is a mid-level print. A bit of experience helps, but it's nothing a careful beginner can't tackle with standard slicer settings.

What file format is Fusion Planter, "Vase Mode" print available in?

Fusion Planter, "Vase Mode" print is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Fusion Planter, "Vase Mode" print free to download?

Yes, Fusion Planter, "Vase Mode" print is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Fusion Planter, "Vase Mode" print

Similar Models

Add to Collection