FUTABA (Persona 5)

Project: futaba.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 124.54x170mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Dark Blue Transmission Distance: 0.3 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Matte Latte Brown Transmission Distance: 2 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Beige Transmission Distance: 8This print uses 5 unique filamentsSwap Instructions: Start with Dark Blue At layer #9 (0.8mm) swap to Orange At layer #16 (1.36mm) swap to Latte Brown At layer #20 (1.68mm) swap to Yellow At layer #23 (1.92mm) swap to Beige for the rest.