Slicer Discord
FuzNuz Sungoggles – 3D-Druckmodell von Thingiverse Thingiverse

FuzNuz Sungoggles

von FuzNuz
65 Downloads
48 Likes
0 Makes
Zum Modell
These are a design for a pair of goggles for horse and carriage racing. They go over the horse's eye to protect from sprayed up mud and sand from the carriages in front of you.

They have a UV resistant lens so they are a bit like sunglasses as well and help protect your horse's eye from the constant exposure to UV light. There is a dark tinted version for riding in the snow. Also keeps the wind out of your horse's eye so it might make them a bit less skittish when riding in the wind. It also is a half blinder as it blocks the horse from seeing behind them when their head is facing forward, but still lets them see everything off to the side.

Also for veterinary applications this is nice since you can just tape over the front of the lens, and have an eye patch, that you then slowly peel away over time.

Note: You need a few other parts to actually make these, it has a lasercut 1/8" thick polycarbonate tinted lens which is glued in place with epoxy. You also need the cushion mater
Quelle
Thingiverse
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Warum?
aufwändige Nachbearbeitung
Einteilig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 2/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Nachbearbeitung
Schleifen, Kleben
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

1 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen