G29 Shifter Long Throw Mod

Hi! Here is a long throw mod for those who prefer a normal car shifter feel.

ABOUT THIS MOD:

This mod Increases the stock throw of about 6cm to 9cm which is closer to a normal throw of a car shifter.

INSTALLATION:
2x m5 screws required. About 5mm (I cut some longer ones down to 6mm)
Longer ones work too

1. Take off the shift pattern cover
2. Screw out the m4 screw holding the knob on
3. Install the knob to long throw mod
4. Slide the knob assembly to the shifter and secure with two m5 screws