Galactus Hueforge

Project: Galactus.hfpPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 116x250mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA Elegoo Black Transmission Distance: 0.2 PLA Elegoo Grey Transmission Distance: 2.2 PLA Elegoo Light Blue Transmission Distance: 0.7 PLA Elegoo Dark Bule Transmission Distance: 2.8 PLA Elegoo Peacock Blue Transmission Distance: 1.9 PLA Elegoo True / Ruby Red Transmission Distance: 4.3 PLA SILK Elegoo Blue_Purple Transmission Distance: 4 PLA SILK Elegoo Blue_Purple_Black Transmission Distance: 4 PLA Elegoo Pick Transmission Distance: 6.6 PLA Elegoo Orange Transmission Distance: 5.6 PLA Elegoo White Transmission Distance: 5.5This print uses 11 unique filaments !!!! It is possible to print this hueforge with a single AMS unit just organize your filament swap in away that makes the most sense to you !!!!! Swap Instructions: Sta