Game console Light Up Keycap

Ansi keycap for Mechanical keyboard with north facing LED's A 0.2mm nozzle is necessary to achieve the fine detailsAMS needed for top multicolor part I print the shine through cap part in transparent petg for best results but feel free to try something else. push the shine though cap up into the body, its a snug fit. Apply a very small amount of super glue on the locating tab before attaching the top, using a brush is recommended, using too much will cause it too seep out the sides. only use a tiny amount They still look good on north facing LED keyboards but they just wont get the light up effectThe Shine through cap part is what attaches to the mechanical switch on the keyboard, the fitment is good in my experience, but everyone's printer and filament might be a little bit different.Make sure you printer/filament is calibrated, if it is too tight or too loose then try adjusting the scale slightly maybe. Please let me know if there are any problems, and feel free to boost the