Slicer Discord
Gameboy Color Shadowbox – 3D-Druckmodell von MakerOnline MakerOnline
Gameboy Color Shadowbox – Bild 1 Gameboy Color Shadowbox – Bild 2
Household

Gameboy Color Shadowbox

35 Downloads
13 Likes
0 Makes
Zum Modell
Gameboy Color Shadow Box Showcase Your Retro Blocks in Style! Transform your dusty Gameboy Color and your favorite cart… no not that cart! a Gameboy Cartridge!  Dust it off and turn it into some sick nostalgia charged wall art! Display it Like a Pro! Pick your play:  Let it chill on your shelf like a well-placed Tetris piece use a single thumbtack and hang it solo (if using a single thumbtack, the batteries are used as a weight offset so its kind of balanced ) if you are going to hang multiple use the holes on each side and use a pencil to mark the wall and put thumb tacks where the pencil marked.    Assembly? Easier Than Clearing a Single Line! top snaps to bottom.. pretty easy.  a normal #2 pencil is what i use to pop the face off for access (and for marking the wall where the thumbtacks need to go)   Battery Bay AA Edition :   ⚠️ ⚠️ Don’t leave batteries in your handheld ⚠️ ⚠️ Remove the batteries from the handheld before putting it in the display ⚠️ ⚠️ Don’t leave batteries in your handheld ⚠️ ⚠️ Pull those AA’s out before locking your Gameboy Color in… unless you want a corrosive mess worse than a misdropped I-block.   Features:  Dual Display Modes: Shelf stacking or wall mounting—your move!  Battery Backup Zone: Keep your power-ups handy, but not too handy. No one needs a battery leak speed-run.  Tool-Free Assembly: No cheat codes required—just print, snap, and admire!   ⚠️ ⚠️Warning:⚠️ ⚠️ Leaving batteries in your Gameboy Color is like letting a Z-block ruin your perfect stack—don’t do it! Stash ‘em in the compartment, keep your handheld pristine, and avoid ruining your Gameboy like i did to my Gameboy advanced  be sure to check out my makerworld profile for other videogame shadowboxes!
Kategorie
Household
Quelle
MakerOnline
Veröffentlicht
Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz
Einteilig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Software
Cura, PrusaSlicer o. Ä.
Gleicher Designer, mehr Plattformen

PrinterInUse veröffentlicht auch auf

118 zusätzliche Modelle auf 2 weiteren Plattformen

Verifiziert durch übereinstimmende Modelltitel über Plattformen hinweg.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen