Gamesir X5 lite extender

This is an extender for the Gamesir X5 lite USB-C telescopic controller. Originally it fits devices up to 205 mm in length. This extender boosts that to about 260 mm, which is the limit to the ribbon cable that connect the two halves. You could further modify the controller with a longer cable to fit larger tablets, also modifying this extender to add some more length. The original ribbon cable is 30 cm, 16 conductors, 0.5 mm pitch. After the modification, the minimum extension is about 155 mm. The process listed below is destructive. If anyone would like to build upon this, they'd be more than welcome to do it. ---DISCLAIMER: Proceed at your own risk. I am not responsible for any damage to your controller or for voiding its warranty as a result of this modification.---Instructions:1. Disassemble the left side of the controller. 1.1. Peel the textured sticker from the left slider part to reveal the screws. 1.2. Remove the screws. 1.3. Pry open the left half of the controller comple