Gandalf

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150x200mm in size, You may print at higher layer heights below the Min Depth of 0.48mm. The Max Depth is 1.92mm and the Actual Depth is 1.92mm.Filaments Used:PLA ****** + Black Transmission Distance: 0.3PLA Sunlu Meta Grey Transmission Distance: 3.5PLA ****** + White Transmission Distance: 7This print uses 3 unique filamentsSwap Instructions:Start with BlackAt layer #10 (0.88mm) swap to GreyAt layer #14 (1.2mm) swap to White for the rest.