Gandolph - Hueforge

I made a bunch of these Hueforge with images generated from A.I.I'm slowly getting around to posting. Hope you enjoy!If you like it please give me a boost :) If you want to scale it up you can but DO NOT TOUCH THE Z HEIGHT! Project: Gandolph.hfpPrint at 100% infill with a layer height of 0.12mm with a base layer of 0.2mmThe Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.8mmThe Max Depth is 3mm and the Actual Depth is 3.1mmFilaments Used: PLA Overture Matte Black Transmission Distance: 0.1 PLA Paramount 3D Prototype Gray Transmission Distance: 3 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (1.04mm) swap to Prototype Gray At layer #10 (1.28mm) swap to Gray At layer #18 (2.24mm) swap to Jade White for the rest.