Thingiverse
Garden Light
par Ikssk
13
Téléchargements
14
Likes
0
Makes
Needed lights for a pathway so I made this. you will need a "smart water bottle" and some wire to complete. Use T10 Wedge Car LED Bulbs. and 1/2" PVC for a stake.
Water bottle is the lens for my light. you need to cut a 45mm sleeve, so cut the top and the bottom off.
I used 14 gauge solid wire treated with a hammer to flatten it and soldered wire on to the side. Flat wire was bent and inserted in the grove of the bottom base to complete my light socket.
PVC was cut to 16" and painted black.
Water bottle is the lens for my light. you need to cut a 45mm sleeve, so cut the top and the bottom off.
I used 14 gauge solid wire treated with a hammer to flatten it and soldered wire on to the side. Flat wire was bent and inserted in the grove of the bottom base to complete my light socket.
PVC was cut to 16" and painted black.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !