Slicer Discord
Garden Stake Caps – 3D-printbaar model van MakerWorld MakerWorld
Garden

Garden Stake Caps

door DamianB2 · Garden
12 Downloads
4 Likes
6 Makes
Model downloaden
SummaryThis a cap for the top of garden stakes. These are useful for a couple of reasons. When using stakes to support plant netting the stake will sometimes rip through the netting. Another reason is to protect the gardener from poking their eye (this happens, ask my wife).The stl file is a cap with a 1.5 inch diameter and a 0.5 inch hole for the pole. The idea is for you to measure the pole diameter and then scale the x y and z appropriately in the slicer. For example if your pole has a 0.4 inch diameter, in your slicer, scale x y and z by 80% (0.4/0.5 = 80%). Its not absolutely necessary to scale z but the shape will change if you don't - not a big deal.I printed this with TPU so it can fit the stake tightly. TPU also makes a nice soft surface. 7-10-2024: Added 3MF of cap for a stake with a 10.8mm diameter.Print SettingsPrinter Brand: Creality Printer: Ender-3 S1 Pro Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament:Overture TPU Grey Notes: Printed at 228 degrees Bui
Categorie
Garden
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Beginner Lage betrouwbaarheid
Waarom?
geen supports
Zonder supports Eendelig
Supports 0/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 0/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA, ABS, TPU
Software
Cura, PrusaSlicer of vergelijkbaar
Zelfde ontwerper, meer platforms

DamianB2 publiceert ook op

135 extra modellen op 2 andere platforms

Geverifieerd door overeenkomende modeltitels op platforms.
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie