gargoyle coaster (hueforge)

Project: gargola piedra.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 100x100mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA smartfil negro Transmission Distance: 0.4 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Beige Transmission Distance: 8 PLA smatfil White Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions: Start with negro At layer #9 (0.8mm) swap to Blue Gray At layer #13 (1.12mm) swap to Beige At layer #20 (1.68mm) swap to White for the rest.