Thingiverse
Garmin Echo series - Scupper Transucer mount
door bics
19
Downloads
10
Likes
0
Makes
Scupper plug for the Garmin Echo series transducers.
The plug is designed to fit a 36mm ~ 40mm scupper hole.
The mount pole is 85mm in length and has a 22mmX20mm transducer mount with a 4 mm hole.
The pole will slid into the scupper cap for 25mm to insure a stable and stirdy mount.
Cable and connector are easily guided along the pole and the scupper cap.
Print in ABS is recommend with Thick walls and at least 20% infill.
Added are Solidwork 2013 part files.
People who made one, please leave a comment below with your evaluation.
The plug is designed to fit a 36mm ~ 40mm scupper hole.
The mount pole is 85mm in length and has a 22mmX20mm transducer mount with a 4 mm hole.
The pole will slid into the scupper cap for 25mm to insure a stable and stirdy mount.
Cable and connector are easily guided along the pole and the scupper cap.
Print in ABS is recommend with Thick walls and at least 20% infill.
Added are Solidwork 2013 part files.
People who made one, please leave a comment below with your evaluation.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
